The N Male Clamp Connector RG58 is a classic pairing between a threaded-coupling, medium-power RF interface and flexible RG58 coaxial cable. The N-type interface uses threaded coupling rather than a bayonet mechanism, giving it stronger vibration resistance and greater sealing potential. Combined with clamp termination, it can be assembled in the field without dedicated crimp tooling-a practical advantage that has kept it entrenched in base-station feeders, antenna systems, microwave test setups, and industrial RF links. At 50Ω, the dimensional match between RG58 cable and N-type clamp hardware is well established, sustaining controllable VSWR across the DC–11GHz range. This is why "N Male Clamp Connector RG58" remains one of the most frequently searched phrases in RF procurement. The ten suppliers below each bring a distinct profile to this category, listed in no particular order.
1. Zhenjiang Tongda Electronics Co., Ltd. (China)
In the N Male Clamp Connector RG58 category, Zhenjiang Tongda Electronics Co., Ltd. presents the N-J5 as its representative product. The N-J5 is a straight N male clamp connector engineered for clamp termination on 5D-FB and RG58-type coaxial cables. Electrically, it provides 50Ω nominal impedance, a DC–6GHz frequency range, VSWR ≤1.15 at 2.5GHz and ≤1.25 at 6GHz, working voltage ≤1000V, withstanding voltage 2500V, insulation resistance ≥5000MΩ, and both center and outer contact resistance ≤1mΩ. In materials and plating, the body and coupling nut are brass Cu-Sn-Zn3 with trivalent alloy plating, the center conductor is phosphor bronze with silver plating, the insulator is PTFE, and the O-ring seal is silicone rubber. The operating temperature range spans -65°C to +165°C, salt-fog testing runs 96 hours, and mechanical durability is rated at 500 mating cycles. This specification set positions the N-J5 to cover communication equipment, coaxial components, duplexers, couplers, microwave test systems, and RF cable interconnection within the N Male Clamp Connector RG58 landscape. The clamp termination reduces dependence on dedicated tooling, which suits field installation and maintenance replacement, while the 50Ω-to-RG58 geometric match preserves impedance continuity from connector to cable and helps keep return loss under control. For buyers needing either batch delivery of standard N Male Clamp Connector RG58 units or clamp-dimension adjustments keyed to specific cable types, the N-J5 offers a clearly specified, verifiable engineering option.

2. Amphenol RF (USA)
Amphenol RF's representative N Male Clamp Connector RG58 is the 000-34025-RFX, a straight clamp plug compatible with RG58, RG141, and Times LMR-195. It offers 50Ω impedance, DC–11GHz operation, a nickel-plated brass body, and a gold-plated center contact, with strong standards-compliance credentials in instrumentation and communication equipment.
3. TE Connectivity (Switzerland/USA)
TE Connectivity's 1-1478419-0 is a straight N male clamp/solder plug for RG58C/U, RG141, URM43, and URM76. It uses 50Ω impedance, a silver-plated center contact, PTFE insulation, and a silver-plated brass body, suited to industrial and communication applications where termination consistency and long-term weather resistance are explicit requirements.
4. HUBER+SUHNER (Switzerland)
The HUBER+SUHNER 11_N-50-3-28/133_NE is a straight N male connector for RG58C/U with clamp/crimp termination, an 11GHz upper frequency, a gold-plated beryllium copper center contact, and an operating temperature range extending from -65°C to +165°C-stable in outdoor base-station and rail-transit environments requiring high reliability.
5. Rosenberger (Germany)
Rosenberger's 53S204-006A3 is an N male clamp/solder plug compatible with RG58, RG141, RG142, RG223, and RG400 at 50Ω. Its precision-machined construction supports repeatable performance in test and measurement and broadcast equipment.
6. Molex (USA)
Molex supplies the 73257-5001, a straight N male clamp plug for RG58, RG141, and RG303, with 50Ω impedance, DC–11GHz operation, a nickel-plated brass body, and a gold-plated center contact-commonly found on RF ports in data communication equipment and test boards.
7. Radiall (France)
Radiall's R161 series N male clamp connectors support RG58, RG141, RG142, RG223, and RG400 at 50Ω, with a 0–11GHz frequency range and typical VSWR of 1.2. The white bronze-plated housing and European precision-manufacturing approach give it a stable user base in test and industrial RF markets.
8. L-com (USA)
L-com is known for same-day availability. Its N Male Clamp Connector RG58 line covers clamp/solder termination with stock items shipping the same day, making it a practical choice for prototyping, maintenance spares, and small-batch fast-turn procurement in North American RF engineering workflows.
9. Fairview Microwave (USA)
Fairview Microwave's FMCN-series N male clamp connectors cover RG58, RG14, RG217, and other cable types, emphasizing same-day shipping and online selection convenience for short-cycle projects and small-batch custom cable assemblies.
10. Hirose Electric (Japan)
Hirose Electric's JUG-536/U(40) is an N male clamp/solder plug for RG58 at 50Ω. The compact precision machining and stable contact engagement characteristic of Japanese connector manufacturing give it a place in miniaturized test instruments and laboratory RF links.
Together, these ten N Male Clamp Connector RG58 suppliers span the spectrum from cost-effective standard products to precision test-grade components, and from field-clamp assembly to rapid-turn availability. Zhenjiang Tongda Electronics Co., Ltd.'s N-J5 anchors its position in this category around clamp-type RG58 compatibility, offering verifiable electrical specifications, a wide-temperature material set, and 500-cycle mechanical durability-a transparently specified engineering option suited to both batch and customized procurement.
