FEATURES & APPLICATION
Gas Discharge Tube Surge Arresters utillzed a gas-filled discharge tube(GDT).The GDT works as an insulator but can be automatically conductive in very short time when the lightening current flows into the protector,then the lightening current will be diverted to earth viaouter contact and grounding means.Once the suge subsided,the GDT rever to its oringinal condition,and be ready for next spark-over.
Surge arresters can work repeatedly if on damage done to the GDT and the miantenance is easy since the GDT is replaceable.It has the characteristics of wide frequency range,low VSWR,low insert loss and easy installation.(Some modenls were developed with CITEL).
tECHNICAL CHARACTERISTICS
| Temoerature Range | -55℃～+155℃ |
| Frequency Range | Dc～2500MHz (Segmented according to user needs) |
| Impeddance | 50Ω/75Ω |
| Vibration | 100 m/s² ( 10～500Hz ),10g |
| Salt spray test | 5% NaCl solution; test time ≥ 48h |
| Waterproof sealing | IP 67 |
tECHNICAL CHARACTERISTICS
| Connectors type | 7/16,N,UHF,BNC,TNC |
| Insulation resistance | 5000MΩ |
| D.C.Breakdown voltage | 90V/ 150V /250V / 500V |
| Peak Power | 25W/ 70W / 190W /790W |
| Discharge Current | 20 KA ( 8/20 US) |
| V.S.W.R | ≦1.20 (1.15) |
| Insertion Loss | ≦ 0.25 dB |
| Durability | ≥500 (cycles) |
MATERIAL & PLATING
| Body | Brass/ CuSnZn3,Nickel plated |
| Pin contact | Brass/Gold,Silver plated |
| Socket contact | Tin Copper/ Gold or Silver plated |
| Resilient contact | Tin Copper/CuSnZn3 plated |
| Insulators | PTFE |
| O-ring sealing | 6146 silicone rubb |
APPLICABLE STANDARDS
MIL-C-39012;CECC 22110.
Pb, Hg, Cd, Cr6, PBB, PBDE in all products and raw materials are both EuRoHS and China RoHS compliance.
APPLICATIONS
Our gas discharge tube surge arresters are widely used in various industries, including:
Power Systems: Transmission lines, distribution networks, substations
Telecommunications: Base stations, communication lines, signal systems
Railway & Transportation: Signaling systems, trackside equipment
Oil & Gas / Petrochemical: Hazardous and explosion-proof environments
Renewable Energy: Solar power systems, wind farms
STRUCTURE & DESIGN
The gas discharge tube surge arrester mainly consists of:
Discharge Tube: Gas-filled chamber that conducts during overvoltage
Electrodes: High-conductivity, erosion-resistant materials
Insulating Housing: Ceramic or composite structure for insulation and strength
Arc-Extinguishing System: Efficient gas exhaust design to eliminate arc quickly
Connection Components: Terminals, mounting accessories, and sealing parts
Hot Tags: gas discharge tube surge arrester, China gas discharge tube surge arrester manufacturers, suppliers, factory
